Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum (2023)


Coleoptera (beetles) is one of the most successful orders on the planet, representing almost 25% of the described animal species1,2,3. The holometabolous development of beetles along with their diverse body shapes and sizes has likely played a role in their success, however, there is an important morphological feature that is thought to have been central to the evolutionary dominance of Coleoptera: their elytra1,4,5. Elytra are evolutionarily modified, beetle-unique forewings located on the second thoracic segment. These wings are highly sclerotized, and act as a hardened shield covering the dorsal surface of the beetle. Elytra also cover and protect the fully functional membranous hindwings of beetles, which are located on the third thoracic segment. The presence of elytra is thought to have allowed beetles to expand into a variety of niches by protecting the beetle against an array of harsh environmental factors, while also protecting their hindwings from damage and thus their ability to fly. Interestingly, although this statement appears quite often in literature (ranging from research articles and textbooks to books geared toward a more general audience)1,3,4,6,7, surprisingly few studies have quantitatively demonstrated the diverse benefits provided by elytra in tolerating multiple environmental stresses.

In regard to desiccation tolerance, elytra and the subelytral space (the space beneath the elytra) in beetles have previously been implicated in body water retention and respiration8,9,10. However, many of these studies were done in beetles from arid environments, with some species possessing fused elytra and/or no flight wings (see ref. 4 for fused elytra, and refs 8, 9, 10 for studies using those beetles), hence it is still elusive how more generic (un-fused) elytra play a role in water retention and if the presence of elytra is critical for desiccation tolerance in beetles. In addition, to our knowledge, the protective functions of elytra against other environmental stresses, such as predation, damage on hindwings, or cold, have not yet been empirically tested.

Here, we used the red flour beetle (Tribolium castaneum) as a model and quantitatively evaluated the functional significance of elytra under various stresses. Tribolium is an emerging model organism, offering a variety of genetic and genomic tools such as the fully sequenced and well-annotated genome11, established gene knock-down and knock-out techniques12,13,14,15,16,17, as well as the comprehensive online resources18,19. Using Tribolium, we have been investigating the molecular mechanisms underlying the evolution and diversification of beetle elytra20,21,22,23,24. In addition to these molecular and genetic studies, we reasoned that this beetle could also be a suitable model to test the functional significance of elytra under various environmental stresses, because of (i) ease of culturing them in the uniform flour for minimizing food related variation, (ii) the ease of collecting a large number of beetles in a short period of time for staging and sexing them, (iii) their short life cycle for a quick assay, and for minimizing developmental variation, and (iv) available isogenic lines for minimizing influence of genetic variation (see refs 25 and 26 to review the benefits of Tribolium as a model). In addition, Tribolium retain functional hindwings and the ability to fly (albeit not enthusiastic flyers), and their elytra are kept un-fused after eclosion, providing a more typical (and ancestral) context to study the function of beetle elytra.

In this study, we subjected the beetles with their elytra surgically removed (ER, Fig. 1a) to four distinct environmental challenges, and evaluated the impact on the survival of beetles lacking elytra. We first examined how elytra may protect hindwings from damage while living in the culture flour. We then examined how elytra may shield Tribolium from predatory attacks, by using a wolf spider (Pardosa milvina) as a model predator. We also examined the role of elytra in desiccation stress by placing beetles at varying levels of relative humidity (RH). Finally, we subjected beetles to a cold-shock and measured their ability to withstand rapid temperature changes. We found that, in each assay, the presence of elytra conferred a significant advantage to the beetle. Taken together, our work provides compelling quantitative evidence supporting the importance of beetle forewings in tolerating a variety of environmental stresses, and gives clues as to how the evolution of elytra has contributed to the remarkable evolutionary success of the coleopteran order. In addition, the unique desiccation and predation assay systems established in this study will be useful to further decipher physiological, behavioral, and molecular mechanisms underlying how insects deal with these challenges.

Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum (1)

Wing damage assay.

(a) Control and elytra surgically removed (ER) beetles. (b–d) Intact hindwing from a one-week-old adult (b), as well as control (c) and ER (d) after 28 days of the assay. (e) Boxplot showing intact hindwings (n = 18), as well as control and ER hindwing area (n = 20 each) after 28 days of movement in flour. The ER hindwings are significantly smaller than the control hindwings (Nonparametric Wilcoxon test, chi square = 36.0093, p < 0.0001).


Elytra are essential for protecting the flight wings from damage in Tribolium

It is often assumed that elytra protect the more fragile membranous hindwings when beetles move through environments that demand intensive physical contact1,4,6, which is believed to have allowed beetles to explore a variety of niches (such as under tree bark and inside the soil) without losing their ability to fly. However, to our knowledge, this role has never been empirically tested. We assessed how much damage the hindwings sustain when elytra are missing in Tribolium. The hindwings from one-week-old adults show no damage (Fig. 1b,e). The hindwings stayed undamaged in the control beetles even after four weeks of living inside the culture flour (Fig. 1c,e, Supplementary Fig. S1). In contrast, the size of hindwings of ER beetles was significantly reduced (chi square = 36.0093, P < 0.0001) due to severe damages sustained in the membranous region (Fig. 1d,e, Supplementary Fig. S1). These data indicate that elytra are essential in protecting the flight wings for Tribolium living in flour.

Tribolium elytra provide significant protection against predation

As a nutritious meal, insects are prime targets for predation. Some insects possess poisons, noxious chemicals, warning colors, or weaponry as their defense mechanisms27,28. The heavily sclerotized exoskeleton of beetles can also serve as an efficient protective layer against predation4. To examine whether the elytron, a highly exoskeletalized wing21, provides an additional advantage to beetles from predation, we evaluated how the absence of elytra would influence the survival of Tribolium during predation. We used the wolf spider, Pardosa milvina, as a model predator (Fig. 2), and monitored the behavior of the predator (spider) and the prey (beetle) in the predation arena (Fig. 2a. Also see Material and Methods for the predation assay procedures).

Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum (2)

Predation assay.

(a) Predation assay overview with spider (arrow) and beetle (arrowhead). (b) Outcomes of interactions between a predator and control or ER beetles. The colored arcs around the control and ER beetles are graphical representations of the outcome of the predation assay, with the length of arcs corresponding to the numbers in the boxes. Only beetles that were attacked could be picked up, and only beetles that were picked up could be dropped, injured, or dead. n = 12. Fisher’s exact test, *p < 0.05.

We first wondered if the removal of elytra would influence the movement of the beetle, as an alteration of prey movement could significantly influence the behavior of the predator, and thus hinder our predation assay29. After the initial 5 minutes of acclimation, the movement of the beetle in the predation arena (without the predator) was recorded and analyzed. Different variables of movement, such as mobility, meander, velocity, and total distance, were recorded (Supplementary Table S1). Principal component analysis (PCA) (see Material and Methods for details about PCA) returned two major principal components (PC1 and PC2). PC1 captured 66.5% of the variation in the movement of the beetle and PC2 captured 21.9%. PC1 primarily distinguished movement from non-movement, and PC2 reflected periods of high activity (Supplementary Table S2). The presence/absence of elytra had little to no effect on PC1 (Z = −0.07, p = 0.95) or PC2 (Z = −0.14, p = 0.86). Removal of elytra, therefore, does not impact their activity or motion, and hence elytron removal should not influence the initial preference of the spider.

Next, we performed the predation assay (Fig. 2a) and evaluated if the removal of elytra significantly increases the chance of predation. In the assay, we found that Pardosa attack control and ER beetles at the same frequency (P = 1.0000) (Fig. 2b green bar, also see Supplementary Movie S1 and S2). This further supports the idea that elytron removal has little effect on the initial preference of the spider. Following attack, however, ER beetles were more frequently picked up compared to control beetles (P = 0.0124) (Fig. 2b blue bar). Control beetles that were picked up were also more frequently dropped by Pardosa compared to their ER counterparts (P = 0.0037) (Fig. 2b purple bar), while picked up ER beetles were more frequently retained and killed compared to control (P = 0.0440) (Fig. 2b black bar, also see Supplementary Movie S1 and S2). Frequency of injury upon being picked up was not different between control and ER beetles (P = 0.6004) (Fig. 2b red bar).

Taken together, these data indicate that elytra do provide advantages to Tribolium at multiple levels during predation. First, the predatory response can be dissuaded by elytra, since control beetles were less likely to be picked up by the spider, and often dropped immediately after being picked up. Second, for more determined attacks, the act of killing (and likely feeding) on intact beetles appears to be significantly more difficult, as only ER beetles were killed in our experiments.

Elytra provide better tolerance to desiccation in Tribolium

Terrestrial insects frequently encounter drying environments30. This desiccation stress can result from arid environments, seasonal changes in humidity, or may be induced by the substrate of their respective niche (i.e. dry soil, sand, or grain). Previous work has shown that water can be lost directly through the integument of insects, and also through the segmental spiracles during respiration (see ref. 31 for review). The elytra in beetles cover the dorsal integument as well as the abdominal spiracles, and have been shown to reduce water loss through these tissues by providing the subelytral space8,9,10,32,33,34. We hypothesized that elytra help Tribolium tolerate desiccation stress, allowing them to survive better in the dry flour-based environment.

To test this hypothesis, we have established a Tribolium desiccation assay system (Supplementary Fig. S2. Also see Materials and Methods). In addition to the presence and absence of elytra, there are at least two additional factors that could significantly influence the desiccation tolerance; sex and food consumption. Many insects (including Tribolium) have the ability to produce water through metabolic processes27,35, thus food consumption could help beetles survive better in a dry condition. Sex can also influence their stress tolerance, as females of some insects are known to reallocate energy from oocytes to survive a stressful environment (for review see refs 36 and 37). Therefore, we took those factors into account, and evaluated the survival rate of beetles for each sex (virgin male and female), at three different RH (0%, 70%, and 100%), with or without food consumption (+/− food), and with or without elytra (control and ER). We tested all possible conditions, except the 100% RH + food condition due to confounding fungal growths that appeared in the flour after the first week of the assay.

With food provided, the control beetles survived very well even at 0% RH. 100% of the control beetles survived for the entire 19 days of assay at 0% RH (Fig. 3a). This result indicates that Tribolium has a very high tolerance to dry conditions, likely with the help of metabolic water produced from food consumption. Removing elytra drastically reduced their survival at 0% RH even with food provided (P < 0.0001) (Fig. 3a, Supplementary Table S3), suggesting that elytra are indeed critical for their ability to survive in a dry condition. A caveat to this interpretation is that elytron removal somehow impacted their general health and caused high mortality that is not directly related to desiccation tolerance. However, providing humidity (70% RH) increased their survival, with 50% mortality of ER beetles occurring between 24 and 25 days compared to between 5 and 6 days at 0% RH (Fig. 3b, Supplementary Table S4). Therefore, high mortality observed at 0% RH in the absence of elytra is mainly due to their inability to withstand the dry condition.

Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum (3)

Desiccation assay.

Survival curves of male (light color) and female (dark color), control (blue) and ER(red) adult Tribolium at various RH, with (+) and without (−) food. (a) 0% RH +food. (b) 70% RH + food. (c) 0% RH -food. (d) 70% RH -food. (e) 100% RH -food. In each condition, the assay was continued until all ER beetles were dead. Scale of (a,b) are 35 days. Scale of (ce) are 15 days. n = 24.

To exclude the involvement of metabolic water in desiccation tolerance, we next analyzed their survival at various RH levels without food. All control beetles died by the 11th day with 50% mortality between 8 and 9 days at 0% RH -food (Fig. 3c). The survival was only slightly improved at higher levels of RH (Fig. 3d,e) with 50% mortality occurring between 9 and 10 days in both 70% and 100% RH conditions. This result indicates that the mortality observed in the control group without food is likely due to starvation and independent of humidity. In the ER group, survival of the beetles was drastically shortened at 0% RH -food, with all ER beetles dying by 4th day and 50% mortality occurring between 2 and 3 days (P < 0.0001) (Fig. 3c, Supplementary Table S3). Interestingly, mortality of ER beetles is reduced by providing higher humidity (50% mortality between 3 and 4 days at 70% RH, Fig. 3d), almost reaching the survival of the control beetles at 100% RH (50% mortality between 7 and 8 days, Fig. 3e). Therefore, the mortality observed at 0% RH without food in the ER beetles is a result of their inability to handle the dry condition caused by the absence of elytra. Sex does not appear to affect survival of the beetles in our assay system, as we did not observe significant differences between sexes in a majority of groups tested (see Supplementary Table S5) (Fig. 3). This may be due to the fact that we used virgin beetles. Together, our desiccation assay clearly demonstrates that elytra play a critical role in tolerating dry environments in Tribolium, both with and without food.

Elytra help Tribolium withstand a rapid cold shock

Cold shock is a frequent stress encountered by species living in a temperate climate. This stress can be encountered both day-to-day as well as seasonally (see refs 38 and 39 for review). To determine if elytra help protect beetles from day-to-day cold shocks, we tested the ability of Tribolium to withstand a short period of low temperature when elytra are removed. We performed a 24-hour cold shock at −4 °C and found a marked increase in mortality of the ER beetles compared to the control (P < 0.0001) (Fig. 4a). This result suggests that elytra indeed help protect Tribolium from a brief cold shock, potentially by providing the subelytral space as an insulator.

Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum (4)

Cold shock assay.

(a) Percent survival of control and ER beetles after a 24 hour cold shock at −4 °C. n = 40. Fisher’s exact test, ***p < 0.001. (b) Percent water weight lost in control and ER beetles after a 24 hour cold shock at −4 °C (cold condition) or a 24 hour desiccation period at 0% RH and 30 °C (desiccation condition). n = 40.

Full size image
(Video) ICAR-JRF AGRICULTURAL ENTOMOLOGY 2019 Question paper with Answers by Ento Agricos

A caveat to this explanation is rapid desiccation during the cold shock experiment. As we showed above, elytra are critical for beetles to withstand desiccation. Therefore, the mortality observed in the ER beetles with a 24-hour-cold shock could be caused at least in part by desiccation. In order to assess this possibility, we measured the water loss (represented by weight loss) induced by an exposure to −4 °C for 24 hours, and compared it to the water loss induced by exposing beetles to the 0% RH environment. The exposure to the 0% RH environment at 30 °C for 24 hours does not cause any mortality even without elytra (Fig. 3c). The ER beetles lost approximately twice as much water weight as control beetles both at −4 °C for 24 hours and 0% RH at 30 °C for 24 hours, confirming an increased rate of water loss in beetles without elytra (Fig. 4b). When the two conditions are compared, the beetles exposed to the dry condition lost approximately four times the amount of water compared to the beetles in the cold condition (Fig. 4b). Therefore, a 24-hour cold shock at −4 °C did not cause a greater loss in water weight compared to beetles that underwent a 24-hour desiccation exposure at 0% RH, even though the −4 °C exposure caused mortality while the 0% RH exposure did not. These data indicate that desiccation alone cannot explain the high mortality observed in the ER beetles that were exposed to −4 °C for 24 hours, supporting the idea that elytra provide an advantage to beetles undergoing a brief cold shock.


Elytra are critical in tolerating a variety of environmental stresses in Tribolium

It is relatively intuitive to imagine the hardened tight-fitting elytra as a dorsal shield of beetles. A multitude of literature, including research papers and textbooks, often assume that elytra protect beetles from various environmental challenges1,3,4,6,7. However, studies experimentally testing the function of elytra as a protective shield are surprisingly scarce. In this study, we demonstrated that elytra are indeed crucial in protecting beetles from a variety of environmental stresses. Our work provides the first comprehensive overview demonstrating the functional significance of elytra, which furthers our understanding of the significance of this structure in the evolution of Coleoptera.

Hindwing damage

The importance of elytra in protecting the hindwings is often assumed to be the driving force for the successful radiation of Coleoptera, by allowing beetles to explore the niches where other winged insects have difficulty dwelling without damaging their flight wings. However, despite the popularity of this statement, to our knowledge, this function of elytra has never been empirically tested. In this study, we demonstrated that hindwings sustained significant damage without the protection of elytra, even though the flour in which Tribolium live is relatively soft. Therefore, the protection over hindwings provided by elytra should be quite significant for beetles living in more abrasive niches, such as under the bark of trees or inside the soil or sand.


Our predation assay revealed that elytra are also pivotal as a protective layer against predation. It is quite interesting that elytra provide an advantage at two levels; during the initial attack where the predator quickly gives up when elytra are intact, and at the feeding step where the predator exhibits difficulties killing (and likely consuming) beetles with elytra. There might be a link between the defensive function of elytra and another defense mechanism that Tribolium possess, a chemical defense. Tribolium have two pairs of ‘stink’ glands, one in the thorax and the other in the abdomen40, which secrete a quinone-based chemical cocktail to repel predators41. Since elytra are covered with numerous sensory bristles in most beetles (including Tribolium)13,20, it is possible that the elytra serve as a sensitive detector for predatory attacks. Removing elytra might have lowered the ability of the beetles to sense the attack, which may have caused a delay in secreting defensive chemicals in the ER beetles. This could explain the two levels of defense advantages we observed in our assay; (i) the large sensory surface of elytra allows sensitive detection of predatory attack, which is followed by a chemical defense to dampen predator’s motivation, and (ii) the exoskeletalized surface of the elytra provides mechanical protection, making it more difficult for a predator to consume the beetle. Analyzing the behavior of the spider when the defensive gland is removed from Tribolium (via a gene knockdown technique) will help further our understanding of interaction between the chemical defense and the protective function of elytra. It is also worth mentioning that beetles with extensive chemical defense systems (such as lycid net-winged beetles and meloid blister beetles) tend to have soft bodies and less sclerotized elytra42,43. Therefore, there might be a significant connection between the protective function of elytra (and the hardening of the entire body) and the chemical properties of beetles during coleopteran evolution.


A possible role of elytra in desiccation tolerance has previously been studied, showing that elytra (and subelytral space) have important roles in water retention, transpiration rates, and discontinuous gas exchange patterns, mainly in beetles from arid environments8,9,10,44. Our study demonstrated that elytra are essential even in a beetle living in a more temperate environment (though flour is a dry niche compared to other natural environments), and that the lack of elytra actually causes high mortality. We also showed that this high mortality was likely caused by desiccation, as providing higher humidity reduced mortality in beetles without elytra (Fig. 3). It is yet to be determined whether the lower desiccation tolerance in ER beetles is due to the exposure of the abdominal spiracles (usually hidden underneath the elytra) or the exposure of the thin thoracic and abdominal integument. In a majority of our desiccation assays, we did not detect any differences in sexes when virgin beetles were used (Supplementary Table S5 and Fig. 3). It will be interesting to see how fertilization will influence their ability to survive in a dry condition.

Cold shock

Insulator and the thermal buffer functions of elytra and subelytral space were initially proposed in desert beetles, in which subelytral space helps beetles withstand high temperature (ref. 45, though this idea was argued against in ref. 46). Our study showed that elytra are critical for beetles to withstand a brief cold-shock, suggesting that elytra (and subelytral space) might also be able to buffer low temperature. A caveat to our assay was the possibility of increased mortality due to rapid desiccation, as we did not control RH in our cold shock assay system. However, as shown in Fig. 4b, the water loss was far less in the cold shock condition compared to the loss at 0% RH 30 °C, even though the former condition caused more rapid mortality. Studies examining cold and desiccation stresses in other insects show that resistance to these two stresses is often acquired mutually via similar physiological responses (see ref. 47 for review). This cross-tolerance would suggest that mild desiccation could actually improve resistance to cold shock. In our assay, however, we saw that beetles lacking elytra are more susceptible to cold shock, despite the possible advantages provided by losing more water by desiccation compared to control beetles. The exact mechanism underlying this increased mortality is yet to be determined. Direct measurement of the temperature of beetles during cold shock may be insightful to assess if elytra (and subelytral space) are in fact acting as an insulator, allowing beetles to maintain their body temperature.

Evolution of elytra and subsequent evolutionary changes in other tissues

Elytra are not simply hardened forewings. In addition to the highly sclerotized and exoskeletalized surface, the shape and size of elytra have also been evolutionarily modified, allowing the elytra to fit exactly to the dorsal surface of the abdominal segments. The vein-derived patterns of elytra are also significantly modified, from a regular parallel pattern of impressed striae and elytral veins in some, to no trace of vein-derived structures in others4. Furthermore, unlike typical flight wings of insects, elytra are usually covered with numerous sensory bristles (setae), both on the veins and in the intervein regions. Considering these diverse evolutionary modifications of the beetle forewing, it is reasonable to assume that many different types of environmental stress have contributed to shaping the beetle elytra. The data presented here demonstrate that the four categories of environmental stress we tested (damage to hindwings, desiccation, predation, and cold shock) can be valid stresses that have facilitated the evolution of elytra.

The sequence of evolutionary events giving rise to the beetle forewing is still largely elusive. Fossils of protocoleopteran beetles provide a hint to a transitional state during the evolution of beetle elytra. Protocoleopteran elytra had several primitive (i.e. flight-wing like) traits, such as the lack of heavy exoskeletalization in the inter-vein regions, a larger overall size, and a more typical wing vein pattern48,49. Some of these primitive traits (such as the lack of inter-vein exoskeletalization) are still retained in Archostemata4, a suborder of Coleoptera, suggesting that the evolutionary changes on elytra happened in a stepwise manner. We have previously shown that at least three independent co-option events have occurred to achieve the overall exoskeletalization of the Tribolium elytra21, while neofunctionalization of a wing gene (abrupt) has facilitated the evolution of elytron-unique shape24. These evo-devo findings further support a stepwise evolution of beetle elytra.

The acquisition of elytra has triggered several secondary changes to the beetle anatomy, possibly making beetles more dependent on elytra. This poses a significant caveat to our study. For example, beetle hindwings are thinner and more fragile than the flight wings of other insects and folded into a small subelytral space4, suggesting that these are secondary traits due to the acquisition of elytra. Because of these characteristics, beetle hindwings are likely more susceptible to damage compared to wings of other insects. Therefore, the dependency of the hindwing on elytra to maintain its integrity is likely exaggerated in our assay system using a modern beetle (Tribolium) as a model. Likewise, compared to the ancestral state of Coleoptera, the very thin dorsal abdominal surface typical of modern beetles has likely caused more water loss through the dorsal cuticle and less protection against predation to beetles when elytra are removed, possibly resulting in exaggerated outcomes in our predation and desiccation assay systems. Nonetheless, we believe that the advantages of elytra in Tribolium that we demonstrated in our assays reflect the evolutionary advantages provided by ‘proto-elytra’ (albeit less efficiently compared to the modern elytra) in the lineage leading to beetles, thus helping us further understand how the evolution of elytra has contributed to the remarkable success of beetle radiation.

Tribolium as a model to study stress tolerance

With a variety of genetic and genomic tools available, Tribolium is becoming a valuable model system for genetic and developmental studies25. Here, we show that Tribolium can also be an excellent model to study stress responses. In addition, we have established unique desiccation and predation assay systems, which allow us to study the response of beetles (and the spider in the predation assay) to environmental challenges with various parameters precisely controlled. The data presented here will serve as a baseline to further investigate how beetles handle desiccation and predation stresses.

Combining the assay systems we developed in this study with gene knockdown techniques, such as RNA interference (RNAi), will be quite powerful for exploring the molecular basis behind the organismal stress responses. For instance, several membrane pore molecules, such as Aquaporins, have been implicated in desiccation tolerance in insects50, however the detailed involvement of these molecules is still unclear. We have identified 6 Aquaporin genes in the Tribolium genome (DL and YT unpublished data). It will be insightful to perform the desiccation assay on beetles with the Aquaporin genes knocked down. Recently, Noh et al., showed that the yellow-e gene is important for desiccation tolerance in Tribolium, further supporting the benefit of using RNAi in Tribolium to study the molecular basis of insect stress responses51. RNAi can also be used to ablate specific tissues, which will be useful to determine their importance in a stress response. As discussed above, the stink gland may play a significant role in the elytron-dependent defense mechanism. RNAi for a stink gland specific gene41 can be used to ablate the gland, allowing us to test the protective function of elytra against predation when the chemical-based defense mechanisms are absent. Although, caution must be taken for the latter type of study, as the targeted gene can have important functions in more than one tissue (i.e. pleiotropic). For our study, we did not use RNAi-based ablation to remove elytra, as RNAi for the previously identified wing genes (e.g. vestigial, apterous, and abrupt) result in abnormalities in several tissues in addition to elytra and hindwings21,22,24. Nevertheless, Tribolium offers a key opportunity to study physiological, behavioral, and molecular mechanisms on how organisms deal with various environmental challenges.

Materials and Methods

Beetle culturing

Beetles were cultured on whole-wheat flour (+5% yeast) at 30 °C with 70% RH (unless stated otherwise)15,23. The pu-11 nubbin enhancer trap line20,22,52 was used for all experiments.

Beetle preparation and elytra removal

Beetles were staged and sexed at the pupal stage, and kept separately until they reached the adult stage. Only one-week-old adult virgin beetles were used for all assays. Beetles were anesthetized using CO2, and their elytra were removed with a pair of micro-scissors (Elytron-Removed group: ER). The elytra were carefully cut off near the hinge instead of being forcefully pulled off to minimize injury to the beetle (Fig. 1a). The removal of the elytra also did not cause any damage to hindwings (Fig. 1a). Beetles that were staged and sexed by the same procedures, but with their elytra intact, were used as the control group.

Wing damage assay

The beetles (12 control and 12 ER, prepared as described above) were placed individually in each well of a 48 well plate (Falcon) with 0.25 g of flour. The prepared plate was then placed in a sealed chamber (Supplementary Fig. S2) at 70% RH and 30 °C. After 28 days, beetles were removed from the chamber and their hindwings were dissected. Hindwings of one-week-old adults were used as an undamaged control (intact). Dissected wings were fixed in 100% ethanol for at least 24 hours, and mounted on slides in ethanol. The wings were documented by Zeiss Discovery V12 and AxioCam MRc5. The area of the wing was determined using Zeiss AxioVision. Wings that became folded during mounting were not included. Areas (mm2) were compared between the groups (n = 18 for one-week-old and n = 20 for control and ER) using a nonparametric Wilcoxon test. For the damage assay, sex was initially monitored but later combined after no sex specific differences were found. The boxplot was generated by the online Plotly tool53.

Tribolium movement assay

To assess general beetle movement, 19 control (9 female and 10 male) and 22 ER (10 male and 12 female) beetles were used. Each beetle had a 5-minute acclimation period followed by a 5-minute trial. The movement of the beetles was recorded remotely and analyzed with motion-tracking software (EthoVision XT Version 8.0, Noldus Information Technology, Wageningen, The Netherlands). We recorded the distance traveled (cm), frequency and duration (s) of time spent immobile, mobile, and highly mobile (defined as 0, 20, and 60% changes in body position between frames (10 frames per second), respectively), total meander (turn angle/distance traveled), and velocity (distance traveled/time between frames). The effect of treatment on activity was analyzed using principal components (PC) analysis to identify variation and patterns in the dataset (see ref. 54 for details about PC analysis). Among the principal components, PC1 (movement vs. non-movement) and PC2 (periods of high activity) had eigenvalues greater than one, and thus were used in analyses54. Each PC retained was analyzed using a Wilcoxon test.

Predation assay

The wolf spider, Pardosa milvina, was cultured as previously described55. Only adult female spiders were used for this study. Each spider was starved for one week prior to the trials. A round plastic bin (Rubbermaid 2.4 L #4 bowl) with a diameter of 18 cm was used as a predation assay arena (Fig. 2a). Filter paper (Whatman) was taped down at the bottom of the arena to provide sufficient traction for both beetles and spiders when they move. The filter paper was replaced and the whole bin was washed with soap (Dawn) and 70% ethanol prior to each trial to remove any possible olfactory cues left from previous trials. To start each trial, first, the spider was acclimated to the arena for 5 minutes (Fig. 2a-i,ii). The spider was then isolated with a plastic vial (Genesee wide fly vial), while the beetle was introduced into the arena for an additional 5 minutes of acclimation (Fig. 2a-iii,iv). After the acclimation step, the spider and beetle were moved to opposite sides of the arena (Fig. 2a-v). The trial began when the vial was removed so the spider and beetle could interact. Upon interaction (Fig. 2a-vi, which occurred almost immediately (less than 1 minute in all trials)), multiple variables were recorded, which include (i) whether the spider lunged at the beetle (defined as an aggressive forward motion toward the prey), (ii) whether the beetle was physically picked up by the spider, and (iii) whether the beetle was dropped (and unharmed/alive), injured (with disrupted movement), or dead. Each trial was observed for an additional 2 hours. Predation behavior was also documented by Exo Labs Camera with iPad (Apple). No spiders or beetles were reused for trials (n = 12 for each treatment). A Fisher’s Exact Test, with the FDR method to control the family-wise error rate, was used to determine the difference in observed categories56.

Desiccation assay

Three different humidity conditions (0%, 70%, and 100% RH at 30 °C) were used for this assay, either with or without flour (+/−food). 24 control and 24 ER beetles were used for each condition and for each sex (prepared as described above). The beetles were individually placed in a 48-well plate. A 7 mm metal fishing weight (Unique Bargains) was placed in each well to provide the beetle with a physical object to assist in righting themselves, should they flip onto their dorsal surface and become stuck (preventing them from consuming more energy while flipped). Approximately 0.25 g of flour was measured into each of the 48 wells for the +food condition. The 48-plates were placed in a sealed chamber to maintain a constant RH (Supplementary Fig. S2). For 0% RH, approximately 200 g of Drierite (W.A. Hammond Drierite Company) was placed in the bottom of the chamber. For 100% RH, a small sponge (Genesee wide fly vial plug) saturated with water was placed in the chamber. For 70% RH, the chamber was equilibrated in a humidity controlled incubator before being sealed. A humidity indicator strip (Telatemp) was also placed in the sealed chamber to confirm the RH inside the chamber. The chambers were kept in an incubator at 30 °C. The survival of the animals was monitored every 24 hours through the transparent lid without opening the chamber. Each beetle was examined for at least 1 minute and monitored for movement. Beetles that showed no movement were considered dead. Beetles that appeared to have died were monitored for at least 3 additional days to confirm death. The difference of survival times between the experimental groups was analyzed by log-rank test.

Cold shock assay

40 control and 40 ER beetles were used for this assay. After measuring their pooled weight (4 groups of 10) (Mettler Toledo AG104), the beetles were placed individually into 1.5 mL tubes (USA scientific) and kept at −4 °C for 24 hours using a programmable temperature bath (NESLAB RTE-140). The pooled weight was taken again after the 24 hours of cold exposure. The beetles were allowed to recover for 4 hours at room temperature, and their survival rates were determined (beetles that showed any movement after the recovery period were considered alive). A Fishers Exact Test was used to determine the difference in cold shock survival. The water loss via exposure to 0% RH was assessed by using the desiccation assay system described above (Supplementary Fig. S2) with 40 control and 40 ER beetles. The beetles were pooled (4 groups of 10) and weighed before and after the 24-hour trial. For both experiments, sex was initially monitored but later combined after no sex specific differences were found.

Statistical analyses

JMP Pro (ver. 11.2.0) was used for all statistics. P < 0.05 was considered statistically significant in all assays. Data were analyzed with nonparametric methods when deviations from normality were present.

Additional Information

How to cite this article: Linz, D. M. et al. Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum. Sci. Rep. 6, 34813; doi: 10.1038/srep34813 (2016).


  • Grimaldi, D. & Engel, M. S. Evolution of the Insects. (Cambridge University Press, 2005).

  • Lawrence, J. F. & Britton, E. B. In The Insects of Australia; a textbook for students and research workers 2nd edition Vol. 2 (ed CSIRO. Division of Entomology) Ch. 35, 543–564 (Melbourne University Press, 1991).

    Google Scholar

  • Hunt, T. et al. A comprehensive phylogeny of beetles reveals the evolutionary origins of a superradiation. Science 318, 1913–1916, doi: 10.1126/science.1146954 (2007).

    Article CAS ADS PubMed Google Scholar

  • Crowson, R. A. The Biology of the Coleoptera 43 (Academic Press, 1981).

  • Crowson, R. A. The Natural Classification of the families of Coleoptera (E.W. Classey LTD., 1967).

  • CSIRO. Division of Entomology. The Insects of Australia; a textbook for students and research workers 2nd edition Vol. 2 (Melbourne University Press, 1991).

  • Bouchard, P. ed. The Book of Beetles: A life-sized guide to six hundred of nature’s gems. (The University of Chicago Press, 2014).

  • Duncan, F. D., Forster, T. D. & Hetz, S. K. Pump out the volume–The effect of tracheal and subelytral pressure pulses on convective gas exchange in a dung beetle, Circellium bacchus (Fabricus). Journal of insect physiology 56, 551–558, doi: 10.1016/j.jinsphys.2009.03.009 (2010).

    Article CAS PubMed Google Scholar

  • Lighton, J. R. B. Simultaneous measurement of oxygen uptake and carbon dioxide emission during discontinuous ventilation in the tok-tok beetle. Psammodes striatus. Journal of insect physiology 34, 361–367, doi: 10.1016/0022-1910(88)90104-7 (1988).

    Article Google Scholar

  • Schilman, P. E., Kaiser, A. & Lighton, J. R. B. Breathe softly, beetle: Continuous gas exchange, water loss and the role of the subelytral space in the tenebrionid beetle. Eleodes obscura. Journal of insect physiology 54, 192–203, doi: 10.1016/j.jinsphys.2007.09.001 (2008).

    Article CAS PubMed Google Scholar

  • Tribolium Genome Sequencing Consortium. The genome of the model beetle and pest Tribolium castaneum. Nature 452, 949–955, doi: 10.1038/nature06784 (2008).

    (Video) ICAR JRF Entomology & Nematology Previous Year Solved Paper 2019|ASRB NET, SRF, ARS|Agriculture & GK

  • Bucher, G., Scholten, J. & Klingler, M. Parental RNAi in Tribolium (Coleoptera). Curr Biol 12, R85–R86, doi: 10.1016/S0960-9822(02)00666-8 (2002).

    Article CAS PubMed Google Scholar

  • Tomoyasu, Y. & Denell, R. E. Larval RNAi in Tribolium (Coleoptera) for analyzing adult development. Dev Genes Evol 214, 575–578, doi: 10.1007/s00427-004-0434-0 (2004).

    Article CAS PubMed Google Scholar

  • Tomoyasu, Y. et al. Exploring systemic RNA interference in insects: a genome-wide survey for RNAi genes in Tribolium. Genome biology 9, R10, doi: 10.1186/gb-2008-9-1-r10 (2008).

    Article CAS PubMed PubMed Central Google Scholar

  • Philip, B. N. & Tomoyasu, Y. Gene knockdown analysis by double-stranded RNA injection. Methods Mol Biol 772, 471–497, doi: 10.1007/978-1-61779-228-1_28 (2011).

    Article CAS PubMed Google Scholar

  • Linz, D. M., Clark-Hachtel, C. M., Borras-Castells, F. & Tomoyasu, Y. Larval RNA interference in the red flour beetle. Tribolium castaneum. Journal of visualized experiments: JoVE e52059, doi: 10.3791/52059 (2014).

  • Gilles, A. F., Schinko, J. B. & Averof, M. Efficient CRISPR-mediated gene targeting and transgene replacement in the beetle Tribolium castaneum. Development, doi: 10.1242/dev.125054 (2015).

  • Schmitt-Engel, C. et al. The iBeetle large-scale RNAi screen reveals gene functions for insect development and physiology. Nature communications 6, 7822, doi: 10.1038/ncomms8822 (2015).

    Article CAS ADS PubMed Google Scholar

  • Wang, L., Wang, S., Li, Y., Paradesi, M. S. & Brown, S. J. BeetleBase: the model organism database for Tribolium castaneum. Nucleic acids research 35, D476–D479, doi: 10.1093/nar/gkl776 (2007).

    Article CAS PubMed Google Scholar

  • Tomoyasu, Y., Wheeler, S. R. & Denell, R. E. Ultrabithorax is required for membranous wing identity in the beetle Tribolium castaneum. Nature 433, 643–647, doi: 10.1038/nature03272 (2005).

    Article CAS ADS PubMed Google Scholar

  • Tomoyasu, Y., Arakane, Y., Kramer, K. J. & Denell, R. E. Repeated co-options of exoskeleton formation during wing-to-elytron evolution in beetles. Curr Biol 19, 2057–2065, doi: 10.1016/j.cub.2009.11.014 (2009).

    Article CAS PubMed Google Scholar

  • Clark-Hachtel, C. M., Linz, D. M. & Tomoyasu, Y. Insights into insect wing origin provided by functional analysis of vestigial in the red flour beetle. Tribolium castaneum. Proceedings of the National Academy of Sciences of the United States of America 110, 16951–16956, doi: 10.1073/pnas.1304332110 (2013).

    Article CAS PubMed Google Scholar

  • Linz, D. M. & Tomoyasu, Y. RNAi screening of developmental toolkit genes: A search for novel wing genes in the red flour beetle Tribolium castaneum. Dev Genes Evol 225, 11–22, doi: 10.1007/s00427-015-0488-1 (2015).

    Article CAS PubMed Google Scholar

  • Ravisankar, P., Lai, Y. T., Sambrani, N. & Tomoyasu, Y. Comparative developmental analysis of Drosophila and Tribolium reveals conserved and diverged roles of abrupt in insect wing evolution. Developmental biology 409, 518–529, doi: 10.1016/j.ydbio.2015.12.006 (2016).

    Article CAS PubMed Google Scholar

  • Denell, R. Establishment of Tribolium as a genetic model system and its early contributions to evo-devo. Genetics 180, 1779–1786, doi: 10.1534/genetics.104.98673 (2008).

    Article PubMed PubMed Central Google Scholar

  • Klingler, M. Tribolium. Curr Biol 14, R639–R640, doi: 10.1016/j.cub.2004.08.004 (2004).

    Article CAS PubMed Google Scholar

  • Chapman, R. F. The Insects Structure and Function. 5th edition (Cambridge University Press, 2012).

  • Resh, V. & Carde, R. Encyclopedia of Insects. 2nd edition (Academic Press, 2009).

  • Persons, M. H. & Rypstra, A. L. Wolf spiders show graded antipredator behavior in the presence of chemical cues from different sized predators. Journal of chemical ecology 27, 2493–2504 (2001).

    Article CAS PubMed Google Scholar

  • Chown, S. L. & Nicolson, S. W. Insect Physiological Ecology: Mechanisms and Patterns. (Oxford University Press, 2004).

  • Gibbs, A. G. Thermodynamics of cuticular transpiration. Journal of insect physiology 57, 1066–1069, doi: 10.1016/j.jinsphys.2011.05.003 (2011).

    Article CAS PubMed Google Scholar

  • Ahearn, G. A. & Hadley, N. F. Effects of temperature and humidity on water loss in two desert tenebrionid beetles, Eleodes armata and Cryptoglossa verrucosa. Comparative biochemistry and physiology 30, 739–749 (1969).

    Article Google Scholar

  • Byrne, M. J. & Duncan, F. D. The role of the subelytral spiracles in respiration in the flightless dung beetle Circellium bacchus. J Exp Biol 206, 1309–1318, doi: 10.1242/jeb.00250 (2003).

    Article PubMed Google Scholar

  • Dizer, Y. B. On the physiological role of the elytra and sub-elytral cavity of the steppe and desert Tenebrionidae. Zoologicheskii Zhurnal SSR 34, 319–322 (in Russian) (1955).

    Google Scholar

  • Fraenkel, G. & Blewett, M. The utilisation of metabolic water in insects. Bulletin of Entomological Research 35, 127–139 (1944).

    Article CAS Google Scholar

  • Harshman, L. G. & Zera, A. J. The cost of reproduction: the devil in the details. Trends Ecol Evol 22, 80–86, doi: 10.1016/j.tree.2006.10.008 (2007).

    Article PubMed Google Scholar

  • Lyons, C. L., Coetzee, M., Terblanche, J. S. & Chown, S. L. Desiccation tolerance as a function of age, sex, humidity and temperature in adults of the African malaria vectors Anopheles arabiensis and Anopheles funestus. J Exp Biol 217, 3823–3833, doi: 10.1242/jeb.104638 (2014).

    Article PubMed Google Scholar

  • Lee, R. E. et al. Low Temperature Biology of Insects. (Cambridge University Press, 2010).

  • Sinclair, B. J., Vernon, P., Jaco Klok, C. & Chown, S. L. Insects at low temperatures: an ecological perspective. Trends in Ecology & Evolution 18, 257–262, doi: 10.1016/S0169-5347(03)00014-4 (2003).

    Article Google Scholar

  • Roth, L. M. Studies on the Gaseous Secretion of Tribolium Confusum Duval II. The Odoriferous Glands of Tribolium Confusum. Annals of the Entomological Society of America 36, 397–424 (1943).

    Article CAS Google Scholar

  • Li, J. et al. Odoriferous Defensive stink gland transcriptome to identify novel genes necessary for quinone synthesis in the red flour beetle. Tribolium castaneum. PLoS genetics 9, e1003596, doi: 10.1371/journal.pgen.1003596 (2013).

    Article CAS PubMed Google Scholar

  • Arnett, R. H. Jr., Thomas, M. C., Skelley, P. E. & Frank, J. H. eds American beetles Vol. 2: Polyphaga: Scarabaeoidae through Curculionoidea. (CRC Press, 2002).

  • Eisner, T. et al. Defensive Chemistry of Lycid Beetles and of Mimetic Cerambycid Beetles that Feed on Them. Chemoecology 18, 109–119, doi: 10.1007/s00049-007-0398-4 (2008).

    Article CAS PubMed PubMed Central Google Scholar

  • Chown, S. L. et al. Discontinuous gas exchange in insects: a clarification of hypotheses and approaches. Physiological and biochemical zoology: PBZ 79, 333–343, doi: doi: 10.1086/499992 (2006).

    Article CAS PubMed Google Scholar

  • Hadley, N. F. Micrometeorology and energy exchange in two desert arthropods. Ecology 51, 434–444 (1970).

    Article Google Scholar

  • Cloudsley-Thompson, J. L. On the function of the sub-elytral cavity in desert Tenebrionidae. Entomologist’s Monthly Magazine 100, 148–151 (1964).

    Google Scholar

  • Holmstrup, M. The ins and outs of water dynamics in cold tolerant soil invertebrates. Journal of thermal biology 45, 117–123, doi: 10.1016/j.jtherbio.2014.09.001 (2014).

    Article PubMed Google Scholar

  • Kukalova, J. On the systematic position of the supposed Permian beetles, Tshecardocoleidae [sic], with a description of a new collection from Moravia. Sbornik Geologickych Ved: Paleontologie 11, 139–162 (1969).

    Google Scholar

  • Grimaldi, D. & Engel, M. S. In Evolution of the Insects Ch. 10, 357–406 (Cambridge University Press, 2005).

    ADS Google Scholar

  • Campbell, E. M., Ball, A., Hoppler, S. & Bowman, A. S. Invertebrate aquaporins: a review. Journal of comparative physiology. B, Biochemical, systemic, and environmental physiology 178, 935–955, doi: 10.1007/s00360-008-0288-2 (2008).

    Article CAS PubMed Google Scholar

  • Noh, M. Y. et al. Loss of function of the yellow-e gene causes dehydration-induced mortality of adult Tribolium castaneum. Developmental biology 399, 315–324, doi: 10.1016/j.ydbio.2015.01.009 (2015).

    Article CAS PubMed Google Scholar

  • Lorenzen, M. D. et al. PiggyBac-mediated germline transformation in the beetle Tribolium castaneum. Insect molecular biology 12, 433–440, doi: 10.1046/j.1365-2583.2003.00427.x (2003).

    Article CAS PubMed Google Scholar

  • PlotlyTechnologies. Plotly

  • Abdi, H. & Williams, L. J. Principal component analysis. Wiley Interdisciplinary Reviews: Computational Statistics 2, 433–459, doi: 10.1002/wics.101 (2010).

    Article Google Scholar

  • Sitvarin, M. I. & Rypstra, A. L. Sex-Specific Response of Pardosa milvina (Araneae: Lycosidae) to Experience with a Chemotactile Predation Cue. Ethology 118, 1230–1239, doi: 10.1111/eth.12029 (2012).

    Article Google Scholar

  • García, L. V. Escaping the Bonferroni iron claw in ecological studies. Oikos 105, 657–663, doi: 10.1111/j.0030-1299.2004.13046.x (2004).

    Article Google Scholar

Download references


We thank Dr. Ann Rypstra for help establish the predation assay, Drs. Rick Lee and Ben Philips for discussion on desiccation assays, and the Miami University Instrumentation Lab for designing and constructing the beetle desiccation box. We also thank members of the Tomoyasu laboratory for helpful discussion. This work was supported by a Miami University departmental grant to A.W.H. and D.M.L. and National Science Foundation to Y.T. (IOS 0950964 and IOS 1557936).

Author information

Author notes

  1. Linz David M. and Hu Alan W. contributed equally to this work.

Authors and Affiliations

  1. Department of Biology, Miami University, 700E High St., Oxford, 45056, OH, USA

    David M. Linz,Alan W. Hu&Yoshinori Tomoyasu

  2. Department of Entomology, University of Kentucky, S-225 Agricultural Science Center North, Lexington, 40546, KY, USA

    Michael I. Sitvarin


  1. David M. Linz

    You can also search for this author in PubMedGoogle Scholar

  2. Alan W. Hu

    You can also search for this author in PubMedGoogle Scholar

  3. Michael I. Sitvarin

    You can also search for this author in PubMedGoogle Scholar

  4. Yoshinori Tomoyasu

    You can also search for this author in PubMedGoogle Scholar


Y.T. conceived the experiments, and Y.T., D.M.L. and M.I.S. designed the experiments. A.W.H. and D.M.L. performed the experiments. All authors participated in analyzing the data and drafting the manuscript. All authors gave final approval for publication.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit

Reprints and Permissions

About this article

Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum (5)

Cite this article

Linz, D., Hu, A., Sitvarin, M. et al. Functional value of elytra under various stresses in the red flour beetle, Tribolium castaneum. Sci Rep 6, 34813 (2016).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:


What is the function of elytra in beetles? ›

Elytra (singular elytron) are the tough fore wings of beetles and earwigs. The elytra are not used in flight but are used to protect the more delicate hind wings. The elytra are often coloured or decorated with pits and grooves.

Do elytra help beetles fly? ›

The paired structures, known as elytra (or singularly as elytron), don't contribute significant aerodynamic advantage to beetle flight. Because they protect the delicate hindwings under all other circumstances, however, elytra help to ensure the capability of flight whenever it's necessary.

What is the definition of an elytra? ›

plural elytra ˈe-lə-trə : one of the anterior wings in beetles and some other insects that serve to protect the posterior pair of functional wings.

Do weevils have elytra? ›

diamond weevil, Entimus imperialis, has jet-black elytra with rows of brilliant green spots (Fig. 1A). The spots are actually an assembly of scales, arranged in pits in the elytra.

What is the benefit of elytra? ›

The presence of elytra is thought to have allowed beetles to expand into a variety of niches by protecting the beetle against an array of harsh environmental factors, while also protecting their hindwings from damage and thus their ability to fly.

What are the characteristics of elytra wings? ›

Beetles usually have two pairs of wings, although some beetles lack them and other species have highly modified wings. The forewings are called elytra (Greek, elytron = cover, sheath). Elytra are thickened, usually hard or leathery, lack veins, and often are sculptured or display pits and grooves.

What is the function of beetle wings? ›

A beetle's functional wings, which allow flying, are the hind wings. The elytra have an ingenious structure with superhydrophobic characteristics, a structural coloration and anti-adhesion characteristics. Their inner structure helps to provide light mass and high strength.

Can elytra be broken? ›

The damage ends at durability 1, so they can never fully break. A pair may be repaired by either using the Mending enchantment, combining two pairs in a grindstone, or combining it in an anvil with phantom membranes.

What is elytra made of? ›

Description. The hard exoskeleton composed of Chitin that covers the wings of a beetle (Coleopter). Elytra provide protection from heat, wind, and moisture evaporation allowing beetles to live in adverse conditions, such as a desert environment.

How does elytra not take damage? ›

Try not to use explosive fireworks when using extra. Doing so,you won't take damage.

Do elytra wings break? ›

The durability of an Elytra will decrease by one point for every second it is being used in flight. When the durability of the Elytra reaches 1 point, it will stop working completely. Instead of completely breaking and not being able to be used anymore, the Elytra can actually be repaired.

Is elytra a real thing? ›

elytra, /ˈɛlətrə/) is a modified, hardened forewing of beetles (Coleoptera), though a few of the true bugs (Hemiptera) such as the family Schizopteridae are extremely similar; in true bugs, the forewings are called hemelytra (sometimes alternatively spelled as "hemielytra"), and in most species only the basal half is ...

How do you fly with an elytra in Minecraft without fireworks? ›

At the exact moment the player's character touches the ground, players need to press the spacebar or jump button twice in quick succession. If executed correctly, this should allow the player to propel themselves upwards. When done in succession, each jump will increase the player's gliding speed.

What is the best elytra enchant? ›

#1 - Unbreaking

Unbreaking is probably the best enchantment for everything in Minecraft. Unbreaking increases the durability of the item. It gives the items more use and allows the weapon to be used with a decreased durability chance.

Can you put Netherite on elytra? ›

With this mod you can reinforce your Elytra with Netherite. The Netherite Elytra has increased durability and is resistant to lava.

How much health does an elytra have? ›

Durability and Repair

An Elytra has 431 Durability points, and consumes one point per second. Once Durability is exhausted, the item will turn into a "Broken Elytra" which has a tattered texture.

Why do elytra change color? ›

When a restricted area of the elytra is subjected to a humidity that normally causes blackening and an adjacent area to a humidity that normally causes yellowing, both change colour in the expected way.

What beetle has a fused elytra? ›

In the diabolical ironclad beetle, the elytra have fused together, forming a tough shield. They also looked at how the two halves of the elytra were attached – known as the medial suture. The join looks remarkably like interlocking jigsaw pieces.

What was the elytra inspired by? ›

The elytra was inspired by the Wing Cap from Super Mario 64 and both have similar gliding mechanics. In the real world, an elytron (pluralised as elytra) is a hardened forewing on insects that closes over and protect the more delicate hindwings.

What are the structure and mechanical properties of beetle wings a review? ›

Beetle wings are composed of a forewing (also known as elytron) and a hind wing. The elytra are rigid. A beetle's functional wings, which allow flying, are the hind wings. The elytra have an ingenious structure with superhydrophobic characteristics, a structural coloration and anti-adhesion characteristics.

What is important about a Beetle's front wings? ›

Beetles differ from all other winged insects by having the first pair of wings hardened and thickened. These hard forewings serve as a protective shield for the fragile flying wings, which are folded underneath. In fact the Latin name for this order, Coleoptera, means “folded wing”.

What material are beetle wings made of? ›

Elytra are the hard casings made of chitin that shield insects' fragile wings (singular 'elytron'). The jewel beetle (Fig. 1), family Buprestidae, has particularly beautiful elytra that come in a range of colors (Angus).

Can you infinitely repair elytra? ›

Therefore, elytra can be infinitely repaired if it has Mending. However, enchanted books with Mending will only be found in the world, like elytra.

How do you fly with elytra like a pro? ›

Flying with the Elytra

It's more like gliding, and you can't fly forever. However, you can hack that by equipping fireworks while you glide. To use the Elytra, you'll need to equip your wings to your character's chestplate slot. From there, climb to a great height, fall, and press the jump key once to start flying.

How do beetle wings work? ›

Beetle wings are composed of a forewing (also known as elytron) and a hind wing. The elytra are rigid. A beetle's functional wings, which allow flying, are the hind wings. The elytra have an ingenious structure with superhydrophobic characteristics, a structural coloration and anti-adhesion characteristics.

Why do beetles have wings? ›

Beetles differ from all other winged insects by having the first pair of wings hardened and thickened. These hard forewings serve as a protective shield for the fragile flying wings, which are folded underneath. In fact the Latin name for this order, Coleoptera, means “folded wing”.

Why do beetles have elytra the hard forewings of beetles instead of membranous wings? ›

Primitive insects have two pairs of membranous flight wings, but during the evolution of the beetle lineage the forewings lost their flight function and became modified as hard, rigid covers called elytra for protection of soft body parts of the abdomen and also the delicate flexible hindwings, which retained their ...

What are beetle elytra made of? ›

Description. The hard exoskeleton composed of Chitin that covers the wings of a beetle (Coleopter). Elytra provide protection from heat, wind, and moisture evaporation allowing beetles to live in adverse conditions, such as a desert environment.

Do beetles use all 4 wings to fly? ›

All beetles have two sets of wings – their body is covered by a hard shell (called an elytra) that protects the thin wings underneath that are used for flying. The thin flying wings fold out from under the elytra when the beetle is ready to take off.

Which wings provides power for beetle flight? ›

"The results show that the forewings, which are held out and flap during flight, generate lift, helping the beetles to stay airborne," says Christoffer Johansson Westheim, researcher at Lund University.

How does a beetle protect its wings? ›

Thick, hardened front wings, called elytra, cover most of the beetle's body and its back wings offer great protection.

What are the functional wings of insects? ›

Insects generally have two pairs of wings, and they are actually part of the exoskeleton. Benefits of flight include evading predators, dispersal, and finding a mate. Other functions of wings include protection, sound production, heat retention, visual communication, and orientation.

Why are the beetles so important? ›

Did you know beetles help keep our earth clean? decomposers provide healthy soil by breaking down organic matter! Dung beetles break down waste, and bess beetles break down decaying wood into the soil! Some beetles even feed on dead plants & animals.

Do beetles have a purpose? ›

Beetles are of value to humans in many ways. They are prominent decomposers, especially in forests. As predators, they reduce populations of problem insects, especially caterpillars. Ladybird beetles are widely known to be important predators of aphids, and can be purchased commercially for this purpose.

What is the most distinctive feature is the hardening of the forewings into elytra that meet at the midline when folded? ›

The most distinctive feature of beetles is the hardening of the forewings into elytra; it is from this that they get their formal name (koleos - sheath, pteron - wing).

What is the difference between elytra and hemelytra? ›

A variation of the elytra is the hemelytra. The forewings of Hemipterans are said to be hemelytrous because they are hardened throughout the proximal two-thirds (approximately), while the distal portion is membranous. Unlike elytra, hemelytra function primarily as flight wings.

Top Articles
Latest Posts
Article information

Author: Clemencia Bogisich Ret

Last Updated: 03/27/2023

Views: 5265

Rating: 5 / 5 (60 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Clemencia Bogisich Ret

Birthday: 2001-07-17

Address: Suite 794 53887 Geri Spring, West Cristentown, KY 54855

Phone: +5934435460663

Job: Central Hospitality Director

Hobby: Yoga, Electronics, Rafting, Lockpicking, Inline skating, Puzzles, scrapbook

Introduction: My name is Clemencia Bogisich Ret, I am a super, outstanding, graceful, friendly, vast, comfortable, agreeable person who loves writing and wants to share my knowledge and understanding with you.